• Wind And Solar Hybrid Controller 600W48V
  • 600W48V Wind And Solar Hybrid Controller
  • 600W48V Wind & Solar Hybrid Controller
  • Wind & Solar Hybrid Controller 600W48V

Wind and light complementary controllers have been condensed for many years of application experience (such as waterproof, dustproof, salt spray, operational wiring errors, fan wind limit control, energy management, etc.) regardless of application To charge control, or street light control, each performance is excellent. In order to cooperate with various applications, the controller adopts layering and building block structure. All functions can be combined with different function boards according to the actual application, which is convenient for quick customization and suitable for application.

Wind & Solar Hybrid Controller 500W12V
Wind & Solar Hybrid Controller 600W24V
Wind & Solar Hybrid Controller 600W48V
Wind & Solar Hybrid Controller 1000W48V
Product Details
Battery parameters

Applicable battery voltage

48V

Battery protection method

Reverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load)

Overvoltage protection point voltage

58.0V±0.3V

Overvoltage recovery point voltage

55.0V±0.3V

Undervoltage protection point voltage

42.0V±0.3V

Undervoltage recovery point voltage

46.0V±0.2V

Battery temperature compensation

5mv/°C/2V (available) (optional)

Wind turbines input port parameters

Applicable wind turbine rated power

600W

Port rated current

15A dc (after rectification)

Port maximum input current

20A dc (after rectification)

Wind turbine speed limit power generation preset speed

500 Rpm (can be set)

Wind turbine current limiting power generation preset current

15A (can be set)

Wind turbine protection method

Overspeed protection, overcurrent protection, inductive lightning protection

Unloading method

PWM stepless high frequency soft unloading (built-in)

MPPT function

Boost MPPT mode (automatic tracking or 5-band curve tracking)

MPPT channel input current

12A

PV input port parameters

Applicable PV rated power

720W/48V (standard)

Port rated input current

15A (standard)  30A (optional)

Charging voltage drop

<0.2V

Photovoltaic Protection Method

Reverse protection (voice reminder)

Unloading method

Open unloading

Discharge output port parameters

Outputs

2-way standard output/PWM mode is 1-channel dimming output

Every output current

12A

Output protection method

Overcurrent protection (15A/30 seconds 18A/0.4 seconds), short circuit protection (current > 150A)

Output control method

Light control, time control, hold output, reverse output,

PWM output (250HZ only on the 2nd road)

Other

Accessibility

Controller internal air temperature monitoring, unloading component temperature monitoring, fan MPPT

Component temperature monitoring, controller terminal upside down installation inversion monitoring (voice reminder)

Display mode

Liquid (LCD) display

Communication method

RS232 (5V level), RS485 (standard) / short-range wireless RF (optional)

Parameters that can be displayed

Fan input voltage / current / power / power generation / speed / unloading current

PV input voltage / current / power / power generation

Battery voltage / charging current / power / total charge / battery status information

2 output ports output current / power / abnormal information

Standby power consumption (screen backlight off)

About 20ma / (12 ~ 24) V system

How to operate

3M foil button operation (4 buttons)

Working temperature and humidity range (environment)

-40~+80°C/20~85%RH (but no condensation)

Protection level

IP41

Controller size (length * width * height *)

235mm*148mm*84mm

Net weight

2.5KG

Design Features:

Waterproof
The circuit board has three anti-treatment and layered structure design, even if a small amount of water enters, it will not damage the equipment.

RS232 Communication
Standard RS232 communication, easy to monitor with computer software. (RS485, short-range wireless optional), using USB to RS232 components, more convenient to do data communication with the computer (computer with USB interface can be used).

Easy wiring
The injection molding process is adopted at the terminal, and the phenomenon of short circuit and wire contact does not occur, making it easier for the customer to operate.

Battery reversal will automatically alert you
The battery input end will not be damaged continuously, and there will be a buzzer warning. It avoids damage to the equipment due to wiring errors, fires, and better protects the battery.

Photovoltaic board reverse connection will automatically alert prompt
The input end of the photovoltaic panel will not be damaged continuously, and there will be a buzzer warning prompt. Special construction at night will not cause wiring errors (Note: The reverse connection detection at night wiring requires manual button intervention).

Continuous short-circuit output protection
The discharge output has continuous short-circuit output protection and over-current protection. Recover yourself after abnormal exclusion. It avoids damage to the equipment due to malfunction of the electrical equipment (especially short circuit) or causes fire.

Fan speed steady power generation control technology
The fan steady-speed power generation control method can make the fan not run at super-speed. In strong winds, the fan can control continuous power generation at a set speed to avoid direct braking of the fan due to stall caused by strong wind. Greatly increase the power generation of the fan and keep the fan running normally.

Wind stall current limiting power generation control technology
The fan stall limiting current control method can prevent the fan from running under overcurrent and protect the expensive generator from being damaged by the heat generated by the overcurrent.

Fan input MPPT power generation technology (boost type)
The wind and solar hybrid controller can provide automatic fan input upper limit power tracking mode, or 5-segment matching curve input configuration mode (input speed vs. input current; or input voltage vs. input current curve), which can greatly reduce the fan’s low wind speed efficiency. Power generation.

Support for multiple output mode selections
The controller offers a variety of output modes (light control, time control, morning light, PWM dimming, reverse) for easy application.

Statistics on cumulative power generation, remaining power, speed, current, temperature, etc.
The controller screen has conventional fan, photovoltaic, battery, output current, voltage, power display, as well as fan, photovoltaic cumulative power generation display, and battery residual power display, fan speed, unloading current display. The temperature of the controller is displayed.

The controller wiring terminal is placed with the warning function facing up
When the controller terminal is placed up, it will be alerted to allow the customer to use it in the correct installation direction, avoiding the use in the open air, or due to weather, the surface of the wire is dew, and the rain directly along the wire, the water is introduced into the controller. The possibility of damaging the controller after a large amount of water has accumulated.

Wind and solar hybrid controller packaging
Wind and solar hybrid controller application range
Wind And Solar Hybrid Controller 600W48V solar wind hybrid system

Contact us

Sales Tel: 0755-23061851
Email: sales@urilic.com